Search for your home cans of various sizes. You can use canned food. Once you have them all, remove the top part and clean them with warm water and soap. Then you dry them completely. Monitors can is not oxidized, in this case precludes their use.
Al freezer! With this method you will prepare the can and then pierce it with a pretty design. First fill about 3/4 can to prevent deformity during the time you are in the freezer. Then add a little water. Now, you can and put the can in the freezer until the filling water is frozen. That will be the time of removal.
With frozen canned, you can pierce it with a nice design. A leaf, a sun, a figure or meaningless points. The issue is to make holes for the light through them and your garden environment. Pay attention.
Draw your design on paper and hook it in the place you feel like the can with tape. Then nail is driven so that the drawing profiles. Be careful not to break the blade. We recommend that you do the first nail in the top of the paper thus be stabilized and will be easier to do the other holes.
Make sure that the holes are spaced and maintain distance between them. So that you get to see the design is symmetrical and perfectly printed on your can. Once you have placed all the nails, it is time to remove them. Remove with care and also off the part of your design. Check that the pattern has been marked on the can you perfectly.
I Hope this Garden Lighting Decoration With Cans article is useful for you. If you like this Garden Lighting Decoration With Cans article, please give a like and share this Garden Lighting Decoration With Cans article to others.
Description : Garden Lighting Decoration With Cans - The illuminated gardens in summer are very nice, give a warmth and a special atmosphere. Candles, sma...